|
hmmm I see the cathode fuse is thru an 82 ohm resistor AND all the DC convergence pots. I can see how drift there would account for my 12v reading. I would have rather the the schematic give a current reading. I did dip the current with the eff coil, but very little improvement (it was pretty close to the dip already. I suppose I should check the HO tube control grid, there is no PP given but it does say -40v. It looks like it taps into the horz osc tube for some grid bias, with a voltage divider that also feeds the video out (assume H blanking for the Y signal). If I dont get the -40v I will take a look at those resistors a 1 meg and a 470k.
|