|
had this set on the back burner for a while. Needed to clean up and get organized. I have an idea, I have an extra CTC-5 chassis. I am thinking of recapping it, see where I am on it. IF I can get it going, I would like to see about making up a fly from more recent fly by adding my own windings for the secondary windings including the convergence windings. I have some flys that have a lot of extra taps, fly 331 IIRC for an admiral. Would be an interesting project. I would like to scope the working fly (assuming it works) then I could try and match up the donor fly. Its a long shot but if it worked it could help boost the HV up from the low HV from the stock 5, not to mention improve reliability.
I am pretty sure I could just convert to a later model like a 15 for HV with the use of a modern convergence cluster and board, and a new vert out, but I would rather try to at least see if I could make one that is closer to the orig.
|