|
Connected to each side of the fuse holder with a 100 watt bulb and got nothing as far as bulb lighting and then going dim. Bulb did, however, get warm. I then put the fuse back in and plugged into my DBT with the 100 watt bulb and it seemed to be triggering the power circuit, It would click, and click constently making the light bulb come on and go off. Like it was struggling to get the power it needed.
I had checked every resistor, diode, transistor and cap in both the HOT and the power supply and everything seemed good.
I am going to try a 150w bulb now
EDIT** Same Thing with 150, constently. Seems, not enough power???
Last edited by dnpainting; 10-29-2012 at 04:18 PM.
|