Quote:
Originally Posted by kx250rider
....And here I thought this was going to be a weightlifting thread!
Seriously, I'd say unhook the tuner, or at least pull the RF & mixer/osc tubes, and see what happens. If that kills the noise in both audio & video, then try a SubstiTuner f you have one, or inject a signal from an Analyst, if available. 9 of 10 times in my experience, pops and disturbances in the pic and audio at the same time, are power supply or sweep/HV-related. In your case it sounds like you've eliminated those though.
Charles
|
I've pulled both tubes in the tuner and no change at all, I will say that when I turn the brightness all the way down it seems to get slightly worse. When you refer to power supply are you referring to HV? LV? or both?