[Dangler]

Thank you very much, Marty!

I did some wire tracing last night and now am not sure if the socket on the amp was used to power the phono. That's what had me wondering since the changer is not getting power.

The amp is a Amp142-OC

The yellow wire from the changer goes to a switch inside the changer compartment marked Auto/Manual and shut off. From the switch, the green and black wires go to a plug that plugs into the back of the radio chassis. The other two red and black wires from the changer go to the same plug on the back of the radio. There is a place on the far right of the amp that says "Phono Motor". Now I'm thinking that might have been a provision for the amp being used in a different style cabinet with no TV.

I'm going to check the switch to make sure it's OK and check the socket on the back of the radio to be sure it's getting voltage.

Thank's again for all of the info. I'll let you know what I find out.