|
Well, I just got the plastic alignment tools, a new old stock set for $8 all together with shipping....
nice to have them, I'm sure I'll need them in the future.
Adjustments did not make much of a difference in sound buzz, only slightly, so I wonder if the discriminator cans are bad? If so, are they impossible to find??
My first thought though is to check all the resistors for correct value.... some look very worn.
For example, there is a 2 watt resistor between the 100uf and 200uf caps, and it should be a 390ohm.
When I checked it, my meter read it at 489...
So, since I am still new to this hobby, how far off can values be? Is that one okay?
I would hate to change any resistors if not necessary, but thought some looked pretty old and worn.
|