|
I noticed one of the speaker plug in mounted to the fiber board on the speaker had come loose, so I pulled the speaker and fixed that. while I had it out I checked the 8mfd cap that is the crossover to the tweets. It checked at about 1 ohm on my simpson 260, both ways, so I dug around and found a sprauge atom 10uf 50v NP. I piggy backed it to the existing cap, clipped on lead so the old would be out of the circuit. the ne cap would quickly go to 700k ohms on the 260. I figure it prob will make no difference, but as long as I had it out I wanted to fix it. I also noted one of the two tweets has a lead broken where it mounts so I will have to pull it and see if I can fix. if not I have a few spares.
|