|
Hi All;
I got tubes preliminary checked, no shorts.. My tube checker is acting a little funny, so for now.. I will leave it as is.. Cleaned the Chassis, took out all the pieces of leaves from under the tubes and cleaned all the tubes.. I have Found and decided what to do about my Bleeder resistor problem.. I still need to ohm out the Transformers.. And start doing a resistor check.. When I can afford it, I will get the Electrolytics,, and then do an initial power up, to see what else shows up.. With Variac..
THANK YOU Marty
Last edited by Geist; 01-09-2013 at 05:18 PM.
|