|
Hi All;
Bob, yes, that's not in that part of the group with the two large resistors.. But it is part of the long divider chain.. The 56 (R232) is in parallel with the Ion Trap Magnet (coil) L202 and L203, which then goes thru the Focusing Resistors and coil, non of which I have checked for now (R182, R183, R184 and L195).. which ends up at --100 Volts, which also is the Center Tap of the Transformer.. The end of R186A (--18 Volts and R185A 230 ohms leads to R232... At least in my version of the schematic.. If there is no Ion Trap Coil and resistor, then I suppose it would be just a resistor.. I have heard that some sets had no Ion trap Electro-magnet, but a perment Magnet.. I realize that there are different versions of the 630 Schematic.. I also have not Checked the other Large Resistor in the High Voltage cage, I will do that when checking out under the 1B3 and see its condition..
THANK YOU marty
|