|
Well I think I found the problem, at least on my set. In restoring the set I put the retrace line mod in to remove the retrace lines. Well I removed the mod and now the picture is o k at any setting of the brightness or contrast setting. I put the mod back in and the pinching of the scanning lines came back. On my set I dont really need the mod as the retrace line are not there unless I turn the contrast way down. So I will most likely leave the mod out. Or I may try some different size components. But for now I have a beautiful picture. Thanks for all the help. I do need a alignment tho guess i will have to ger me a sweep generator. OH well. Thanks
Joe
|