|
If you're trying to replace a 90 degree 19" CRT from the 1980's-1990's they're usually interchangeable as long as the number of pins are the same and the neck diameter matches. In arcade monitors the general rule of thumb is use the original yoke that came from the recipient unless, of course the DC resistance of the two yoke windings are the same or really, really close.
In the tv to arcade swap, the tube of choice, 19VJTP22 is hard to find. I usually keep an eye out for early 1990's 19" round corner TVs which I know to have the right number of pins and neck diameter and go through the convergence ritual. There are a lot of 19" TVs around.
|