|
I was a little bit surprised at how small an adjustment was required to from practically no green (green would look either blue or brown depending on tint setting) to perfect green, the adjustment was about a 1/4 turn and it is very narrow. I have had quite a few sets that had brownish greens, so next time before I touch anything I am just going right to the vectorscope and the gated rainbow to see whats happening. But you mention that in some cases a round petal design is not optimum. Most of the CRTs I work on are the 21fjp22 or 23vadp22 types. I have a both grey face and green face types of the roundies.
|