Quote:
Originally Posted by Bill Cahill
No. I know what's wrong.
You were loading down the poser supply before, so, horiz. osc. was right on. You changed it to correct values, taking some of the over load off, so, now, horiz. osc. needs re adjusting.
On the damper caps. not high enough voltage. They MUST be 1KV.
Tim, you are closer than you thought. The lin. coil doesn't adjust the oscilatr. Power supply was being overloaded before. Remember? Low hv?
Set was drawing more current.
Leave the correct caps in, and, re align the horiz. osc. according to instruction.
Bill Cahill
|
Okay, review this with me for a sec
Since last update, I replaced the one .018 damper filter, which was basically split open on the back. I assume that's where I repaired the low HV issue.
I may be wrong, but I don't see how the cap on the linearity coil can affect HV. If anything, won't it affect the time base of the horizontal oscillator? In fact, when I first powered the set up, I was able to crank the control to the left and lock the picture in with multiple images.