|
Okay, it's been awhile, but I'm finally getting around to working on this problem.
I've replaced the 10uf 350v cap (it measured out at only 4uf and appeared to have leaked some time in the past), so it was bad. While I was in there, I replaced other axial caps and removed the canister. The canister tested good, but I'm taking it to my brother's for testing with his ESR (or what ever that thing is called). I found a place that has an NOS canister, but I don't trust that after all these years it will be worth trying. I have purchased all the caps that are inside the canister and my brother will open it and replace all of them and put the back in the canister.
Let's hope this does the trick, because it started getting worse. The left 1/3 of the screen would have nice contrast and brightness, but the right 2/3 of the screen would be way too bright until it warmed up and then they would almost even out. It would still show the jail bars, though.
Anyway, I appreciate all the help and I'll let you know how it goes. Should be done by Friday.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|