|
Hi All;
Old Coot, I just looked at the Can and it has (as near as I can tell) the negative as the common point.. I also, Just looked at the Sams and It also shows that the + (positive) side of that cap going to Ground..
On another Cap the (C225) on the Riders, When C225A is connected to Cap C221B, then the voltage goes LOW, about 45 volts at 120 volt input to the transformer, But when C225 is not connected to C221B, the the Voltage is about 230 volts, still slightly low, by 70 Volts, but that could just be my Rectifier, since they are all old Tubes.. So when C225 is connected either what is connected on the other side of it or the other Cap, Is pulling things down.. I have yet to disconnect the rest of the wires from C225 to see IF it has any affect on the Voltage Dropping..
THANK YOU Marty
|