|
Hi All;
I'm back, got the dope.. I am going to first try with just the Iron on the end of the stub, for now there is about an inch of wire coming out of the fly-back, the lower half of that inch is burnt black and the end might be semi clean just dirty..
Old Coot, I am wondering If you could tell me what would be the causes of the 6BG6 going purple, and the arching, Once I know what type of things to look for I hopefully can better asses what or where the problem might be.. Such as too much current draw, but WHY is it drawing too much current ?? and etc.. Also, I may as well test the fly-back resistance readings.. Will, let you know on the next posting what I find.. I hope that It isn't a semi-bad fly-back..
THANK YOU Marty
|