|
Looks like the photo of the fine tuning knob in the picture (if that is what it is) is wrong. That fine tuning knob is probably for a ctc5. You need a fine tuning knob like a CT100 uses. IF has a great big hole in the center (about 1.25" dia)
RE: HV cage. If you have an electroplating shop that does tin plate, I would take it there. Zinc can also be done but it doesn't look as good as tin plate.
Otherwise a simple paint job with aluminum spray paint looks OK.
__________________
Vacuum tubes are used in Wisconsin to help heat your house.
New Web Site under developement
ME http://AntiqueTvGuy.com
|