Hi All;
This is the longest that the set has been on !!
I put a Video signal on the connector on the back, part of the Horiz. Sync Discrimiter.. I origionally thought it was part of the Sync Amp.. And I got some picture ..
Its a mess, but it is Video !!!
I need most likely to replace the Sync Integrator Caps and Resistors, when they come in from Mouser.. I will look at the 1st and 2nd Sync Amps and the Sync Seperator and see If there is any other Caps that I have at the present that I can replace now..
THANK YOU Marty