Quote:
Originally Posted by Winky Dink
...With the '27 pulled, I get the same plate voltage--about 6V, and about 9V at filter block terminal 6.
|
Since you indicate the 70K resistor feeding B+ to term.6 (point 'E') is good, you want to look for a low resistance leakage path from point E to ground.
Quote:
|
The replacement caps are all nonelectrolytic, and they still look OK. To be sure, I'll take them apart, reassemble on the bench, and make a temporary reconnection before reinstalling the block.
|
Check the replacement 2mf cap for leakage.