|
Hi guys,
last evening I tried to make a photo of the signals requested
but I found a new issue.
The signal at the videodetector was suddenly disappeared.
Seemed a bad contact but in 2 hours I didn't fix this.
After various simple checks I was very sad of this but the
signal magically re appear. Can this be a problem on high frequency
down converter or oscillator?
This set have two inputs VHF and UHF and two different tuners.
Since starting on this project I have used a VHF signal I didn't try to switch on the UHF signal.
I will try again to fix the issue tonight.
thank you
|