Quote:
Originally Posted by wa2ise
They must have gotten a great deal on twinlead, if they used it to feed the tweeter. Being flat helps, but any thin zip cord would also do.
|
LOL - you might be right. I was wonder why the used twinlead.
Quote:
Originally Posted by davet753
Banderson: I think the 1B3 was developed as an improvement on the 1J3. Seems like I read somewhere that the filament on the 1B3 tubes were designed a little huskier than the 1J3...
|
Hmm. I dug up some datasheets on the tubes and they both show 1.25 +- 0.2 for the filament
The Slip Plate came out pretty good I think. This set relies entirely on the CRT to filter the HV so I figured it was important to have a good coating.
