|
I finally pulled this set out the other night and noticed that the power switch was dangling loose inside the set. I jumped the switch, applied power; and, it came to life with no vertical deflection. I wiggled the vertical output tube and got sweep back; but, vertical deflection is still off. I also noticed that the vertical and horizontal sync is off at turn on and has to be adjusted each time the set is turned on. The good news is that the CRT is strong and the only problem areas appear to be in the sync circuits and vertical output stage. Once I get the picture locked; the TV presents a sharp picture with plenty of range in the brightness and contrast controls. I'm sure this set will be fine with some new capacitors, some resoldering, and cleaning of the tube sockets and controls. Everyone who I've talked to who remembers this chassis tells me that it was one of RCA's better B&W sets.
|