|
Slim chance you will ever find a good or NOS efficiency coil for this set. The plastic spool assembly for the efficiency coil is the exact same as any of the right side convergence coil assemblies. Your best bet would be to get a much more easily obtained convergence coil, unwind the wire off of it, and re-wind the spool with the wire from your existing efficiency coil. Its not that hard becaus the wire gauge is much thicker for the efficiency coil, so there is no worry of making a mess of the wires, plus there is no special winding pattern, just CAREFULLY follow the winding direction as you unwind the old coil so you can "recreate" the new one. I've done it before. Works perfect. Just be sure to use the original iron slug from the old coil.
|