|
Another Update - got the set back together, no change.
Took a second look at that black component (PTH451A) - that's actually a Thermistor after looking up the number.
Tested the HOZ Output Transistor(s). the 2SD869 next to the Flyback was 542 ohm on both prongs. The STR384A tested 594 on one side, and 194 on the other....not sure if that's right or not.
Is it normal to have a Set as clearly laid out/labeled as this (ie, large white outline labeled with "power", "dega (Flyback)" Video 1 (Base video), Video 2 (Tuner),, and every single cable inside the case is labeled and keyed to fit properly only one way. Zeno was not kidding when he said this was an easy set to work with. Takes me about 15 min to get the board out including discharging the anode and removing it.
|