Quote:
Originally Posted by Electronic M
I find that chassis design fascinating....I've never seen a monochrome set with such a compact, minimalistic chassis before.
|
It sure is! Here is the flyback side again before I cleaned it. The plastic tube under the coil has the HV rectifier tube stuffed inside it and the wires are just attached to the pins with push on connectors. No socket at all! I don't know how common it was in portable tv's, but I haven't seen that in a radio yet. The CRT has no socket either.
The only electrolytics are the four section can and one 100mf 10v on the other board. There are about a dozen molded paper caps and the majority are ceramic. If the boards can be taken off without too much trouble it should be pretty easy to re-cap.
Quote:
|
On second thought you might want to change out the .1 ceramic cap near the flyback, I hear they go bang pretty loudly.
|
Will a regular film cap be ok for a replacement or is there something else I should use?