[Charlie]

Joe,

The convergence assembly in the pic hanging to the left of the broken neck... use some TLC with that. Those assemblies can sometimes be quite brittle and break. Also, considering the missing part of the neck, do you see the centering rings in there somewhere? There should be two rings with little tabs on a plastic piece that fit over the neck.

CTC-15's are typically pretty easy to work on. The worst part is installing all of those damn electrolytics... whether you're going to restuff the original cans, or just tuck new replacements under (and over) the chassis somewhere.

There are several threads in this forum regarding CTC-15's. It would be worth your time to read over some of them.

Good luck with your set.