|
I notice that turning the contrast all the way down removes the vertical white line. I can then turn the brightness all the way up with no line.
If I connect the Heathkit vectorscope and use its switches to disable the CRT grid video I do not see the line. Just connecting the vectorscope leads to the CRT grids reduces the white line quite a bit. Maybe high frequency ringing occurring during the horizontal retrace somehow coupling into the video?
I am using three modern 120 mH peaking coils that drive the CRT grids. I tried substituting an old style Miller replacement 120 mH peaking coil, but it shows the same white line.
Maybe I can track it down by putting in caps to filter out the noise at places along the video processing...
|