Before you dig in do 2 things.
1)Clean the crap out of the anode area & anode wires. Pull the
connector off & make the area shiny up to the dag coating.
Do not use anything abrasive. I always used 91% isopropal
alcohol.
2)be sure ALL the 22-5001 safety caps have been changed from
the white ones to the orange drop style. IIRC there are 2 on the
flyback board & 3 under the chassis nearby. Looks like at least
one has been changed.
The chromatic switches to a second set of identical controls &
also affects the tint range. The brightness, contrast, color
& tint controls have hollow shafts. A thin screwdriver adjusts the
chromatic on settings.
After steps 1 & 2 fix the lin problem & get the pix as perfect a B&W
pix as you can THEN turn up the color...........
You are truely blessed. You own what is the best color TV chassis
ever built by anyone, anywhere, at any time. And a remote too !!!!
73 Zeno
