|
When I'm doing the grayscale adjustment, do I turn the color control down? It says to turn it down, but that's when you don't have a b&w program. It says to turn it to minimum if you're using a color program. But what about for the G2 adjustments? Like I said in an earlier post, I can't get the red raster line to show (even with the control at max and the tap on HI). My gut tells me that if the color control is active in setup, then that would really make it more difficult to adjust the G2s as the color control can be in many different positions at the start of calibration.
Also, it says to adjust the G2s with their taps on HI and after you've adjusted them to use a B&W program and move the taps to remove color in the white areas. What I need to know is if adjusting the taps doesn't remove the color, is that because the G2 was adjusted too hi compared to the other guns? Would I then redo the G2s or just reduce the one showing in the white areas?
I hope this makes sense.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|