Quote:
Originally Posted by andy
4, 5, and 13 are the G2s. You won't be able to fit a meter probe in the socket (don't force it, or you'll ruin the socket). The exact voltage isn't important, but they should all cover roughly the same range when adjusting the corresponding G2 control. They should max out around 900v or so. You'll probably have to measure it from under the chassis.
|
Thanks. I see they run under the chassis to the G2 pots. I will have to put the set on its side, take the base off, take the underside chassis cover off and leave it like that so I can measure the voltage. Since each one of those leads has more than 500V, I'll have to get my hands on a DMM that can do more than mine.
Is there any danger of a short if I accidentally touch any other lead on the G2 pot or the body of it?
Thanks
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|