|
Well I managed to get a dim red raster line and adjusted the blue and green to the same level (really the best I could guess as a dim line looks like a dim line). From there I got a b&w image and adjusted the taps to a screen that had just a very slight blue tint to it. Moving the tap lower made the screen a bit red. So I put it back. Should I try moving the blue G2 down a bit?
The convergence is a bit messed up. I'll have to wait until Thursday when I get the pattern generator. I'll use it to converge the center dot, then do a purity and finally do a convergence. Hopefully all will go well.
I do have a question about picture height and width. On my other CC2 it has height and width adjustments. On this one I don't see them and they aren't listed in the SM. The overscan is a bit too much and I'd like to reduce in all directions.
Thanks.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|