Quote:
Originally Posted by Eric H
Usually you can hear a very short 60 cycle hum coming from the CRT area on a cold start if it's working, not always though.
|
Well did some testing today. The degauss circuit shows 120V when the coil is disconnected. With it connected, it shows less than a volt. I went over the schematics and I found a thermistor that I believe is the culprit. I looked up the part number and got 63-8687. Doing an internet search got me to a few sites selling the replacement part of ZEN63-10710. I'm trying to find a place local to Hollywood, CA as the part 4.80 and the shipping is another 6.00. Kind of pricey.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|