Quote:
Originally Posted by zeno
IIRC the Zenith tuners were in separate manuals with numbers
like TM or TS. I probably got the Sams, I will look tomorrow.
They almost always have all the different tuners, remotes, etc.
Sams are also a bit easier to work with, Sams are all drawn
the same where as factory manuals are all different.
Some of the Japanese ones are horrible..........
73 Zeno  |
The Sams I have now has the tuner as part of it, but it's for a manual tuner. The Sams site only has this one listed, so I downloaded it.
I took apart the Space Command 600 to clean it and grease it if need be. I got it back together, but even from the start it didn't look right. I think someone had been in there before. The bars must be in the correct positions as it was working, but there are marks on the ends that I think note position. There are four of them and they start of with one mark, two marks, three marks and four marks. The thing is that the started of as 2,3,4 and 1. I figured it would be 1,2,3 and 4.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|