Quote:
Originally Posted by N2IXK
If you disconnect the degaussing coil, does the problem go away?
If the coil current never shuts down completely due to an improper thermistor value, wavering color patterns will show on the screen.
|
I disconnected the degauss coil and it still exists. I forgot to note that the white lines on the screen appear to be "flickering." Kind of like the refresh rate is wrong. That could just be and older set displaying a modern pattern.
The service manual says something about an APC adjustment. IT says to adjust for minimum movement of color bars.
I got this set used and it is obvious that someone messed with quite a few of the controls. They might have messed with some of the less common ones as well.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|