[TinCanAlley]

I'm doing the color purity, grayscale and convergence tomorrow and will be using a pattern generator. It comes with clips that pierce the wires for the color gun and allows you to short them out for setup/testing. This approach seems better than turning the G2 controls and messing up colors each time. The only issues is, I don't know which wires are the G1 (in another thread I was told they go on the G1s not the G2). I know the G2s are white w/red, green and blue stripes. That leaves two more sets on the socket. I'm attaching a pic and hope someone can point to the G1s. They're either the yellow w/r,g and b stripes, or the solid r,g and b.

Thanks, sure wouldn't want to damage something.