View Single Post
  #4  
Old 07-17-2013, 12:40 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
If the color decoder is not working there is not much point in doing a purity adjustment. I have used the pure primary test pattern method for purity for years and it has always worked fine. As long as you are getting a color on the screen that indicates your desired primary is much brighter than the others it will work for setting the purity. The tint does not need to be EXACT for this to work. As long as red is fairly red, green is fairly green, etc. it will work fine.

I have a 71' Zenith where you can unplug leads to kill individual guns. I've set it's purity with the primary color test pattern method then unplugged the guns to check my work, and it looked the same with the blue and green guns unplugged as it did with a red test pattern purity wise(there was a slight color shift in the red but not much).
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote