|
I managed to set it by first disconnecting the IF lead, turning all controls down, setting the taps to HI and then starting with the red control. I turned it up 'til light raster and back it down 'til it just turned off. I did the same with the other two colors. When I was done I reconnected the IF lead and put on a b&w program. The grayscale was good (to my eye anyway) and all I did was move the taps to MED and all was good.
Seems there are different ways to get the end results. I know the SM approach was BS as I couldn't get it right by a think horizontal line on the screen.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|