Quote:
Originally Posted by mpatoray
Yep it is in that area, there was also a diode with the same part number near the HOT. It's one of those grey "squashed round" style silicon diodes.
|
Sounds like a BYV2X or BYV3X series diode - gray in color, not quite full spherical, with a black band on one end. Again, a DXXX designation would help.
If it is a scan derived supply (off the FBT), I generally use a BYV26D diode, as I have a stash of them. If it is a logic supply (5V), I'd use a RGP30 series didoe from a junk board -the RGP30's have a higher current rating than the BYV26D. The guidelines are 1) use a fast rectifier, and 2) use a high enough voltage/current rating to cover the draw.
Cheers,