Quote:
Originally Posted by Eric H
The old caps should be disconnected completely, besides adding capacitance they can still short out if left in the circuit, and they can also be leaky between sections.
Some of us like to gut the old cap and put the new ones inside for appearances sake.
|
At this point I'm just trying to see if the jail bars change based on the addition of the paralleled cap. If it's best to disconnect the lead from the canister, then I think I'll just get all the replacement caps needed to clone the canister, install them on the bottom side of the chassis and leave the can in place for show.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|