|
Thanks to reeferman for posting schematics, I would turn coil 703, which is the 3.58 osc. the other coil looks to be tint, or phase. If the frequency is not right, adjusting the phase will do no good. Think of adjusting the frequency as the course adjustment here, and phase, as a fine tuning to get the color right, once the osc. is locked in....
If you short pin 2 of the osc. tube I would imagine the bars would go away...... is this not true reeferman?? Turning off the color osc?
Well whatever you do, don't turn both coils without returning them to their starting point. If you turn one 2 turns to the right, remember it and return it to its starting point. You don't want to throw the set out of alignment for what may turn out to be a bad cap, or out of range resistor, or open resistor..... Check the voltages that are on the schematic while you are there....... First.
__________________
Yes you can call me "Squirrel boy"
|