[kramden66]

Well picture seems ok with the 250 volt resistor , this set shows a nice picture with a brightner on it , i had one in the past with a really good 16ep4 crt and it was as bright as this one is with the brightener , you might want to check resistors in the brightener circut because my original one was dark and a friend pointed out that it could be a resistor and bingo it was brighter because a resistor wasn't right, this one you can see without a brightener things getting a glow where there shouldn't be getting that silver or negative look , this doesn't happen with the brightener.

i do get lines but incomplete vertical retrace lines with copyguard that are bright and come and go , unsure if doing the retrace remover will work , reminds me of a zenith color roundie it did the same thing ......one other thing is if i want to fill the entire screen and stretch the horz to compinsate to make things properly proportioned i can't unless theres something to alter to do it , the 10" mayflower you can do it to , you miss more of the image but don't get people who are too tall and thinner but it doesn't have the expander switch , i know they were designed to expand verticaly but they should have stretched horizontaly too like the stromberg 10" when you push the expander switch.
Carl your crt is ok ?

mike