Quote:
Originally Posted by zeno
The etch is fine. I have seen it before , I think its magic
marker.
On Zenith modules its common to have bad plug in IC &
transistor sockets. Especially on the upright ( 25EC45 etal )
chassis. They eliminated them I think on all rebuilt boards.
The sockets are less reliable than the parts !
73 Zeno  |
I tried the original transistor again and the set wouldn't fire up. Putting in the one from the old board in again worked. So now I need to find me an NTE171 locally. Not gonna spend a couple of bucks for one and then $7 for shipping.
Interesting, though...The jail bars are still there after all this work. The image is better, though. I tried the video processing board I got and it was a disaster. It's an update board and NOS, but when I fired up the set, the horizontal was screwed and the control on the back of the set couldn't fully correct it. The color was also messed up. Some areas were black and white with flashing colors now and then and the brightness and contrast were messed up as well. I figured it was safer to put back the original board than try to adjust setting to see if the new board was working properly
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|