Quote:
Originally Posted by andy
A Torx screwdriver will definitely crack those cores sooner or later. Even with the proper size plastic tool, you have to be gentle.
The core can normally just screw in and out fully with nothing stopping it. If you have to, you can always enlarge the hole at one end.
|
If it were to screw completely out, it would be from the top. The bottom hole is about 3/16 or less while the top is about 5/16 or more (to lazy to do exact measurements).
You wouldn't happen to know where I can get a nice set of alignment tools and non-conductive as well?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|