Thanks. I decided to do something about the deteriorated decals. Curious how you can see the outline where some have worn away. I would have expected the decals to be applied over the toner ?
I carefully scrapped away the remaining decals, touched up the lacquer and applied new
decals from Radiodaze.
Once the decals are fully dried out, they were buried in a few layers of lacquer with sanding in between until the edges disappeared.
The knobs are a bit mismatched but fit well. Someday I'll do something about the mask. I also see that the chassis needs to be shifted to the left a little so the knobs will be centered over the decals better.
