|
Are these the caps (photo below?)
I resoldered the transistors on the Horiz board to try to cure the intermittent, it seemed to have worked but very shortly after turning it back on I started to hear some HV arcing and shortly it was shooting fire out the bottom of the tripler, hopefully it's not a runaway HV problem but I will need to replace those caps and the tripler before I try it again.
Rechecked the CRT and it's still fine.
Possibly the Tripler was what took this set out of service originally, I don't think that inch long crack happened instantly.
The intermittent connection may have come later, maybe when I fixed that it brought the HV up enough for the Tripler to start leaking again?
Will a 212-148-01 Tripler replace a 212 141 05? Turns out he one I have is totally wrong for this model so I will have to find another one.
|