|
I have a test jig that uses that method of CRT retaining (metal shield), on my CTC-7 there was a metal ring with rubber feet that mounted mid way up the bell and was secured with 4 legs to the bezel. In my case the problem with using a FJP in lieu of a CYP was the anode button of a CYP is much closer to the face. The ring mount on my setup happened to be about 1" away from the anode, so you need a really good tight fitting HV cap to keep it from arcing.
Last edited by DaveWM; 08-18-2013 at 12:37 PM.
|