Quote:
Originally Posted by marty59
Since you have them handy I'd use 'em. While true that carbon comp's can drift, become noisey, etc. you do have some new ones at your disposal. Not all carbon comp's go bad "just because" and I'm sure there are still lots out there operating just fine including my sets and equipment too.
|
Cool. Just wasn't sure if they would be a fit in that circuit. I know they're all over the bottom of the chassis, but there's also lots of carbon films as well. Can't figure out the logic behind using two different types unless the characteristics of each type fit the intended use.
Thanks for the input.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|