Quote:
Originally Posted by DaveWM
 
BtW, does your schematic give you voltage readings for that transistor? if so it would not hurt to check them. Make sure you check the notes regarding without signal, line voltage etc...
Be VERY careful reading voltage with SS parts, a slip of a prob can instantly destroy a diode or transistor. |
Well I replaced the transistor and it didn't help. Figured since I was in there I change the other since I had the replacements. I managed to change all of them except for the 3rd Video Amp. When I installed it, there was no picture. I reinstalled the original and it worked fine. The legs on the replacement are not in a row (they in an arc). I know the center back is the base and I had assumed that since the outer two were forward of the base, it would install in the socket that way. Am I wrong? Do I need to bend the legs backwards to rotate and install it?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|