Quote:
Originally Posted by radiotvnut
Those focus dividers were high failure parts and arcing is one of the failure modes. You could probably insulate it heavily with silicon; but, it's only a matter of time before it fails. The HV tripler is another high failure area.
If this were mine, I'd remove the focus divider and tripler and replace both of them with an ECG526 or NTE526 tripler. The 526 tripler was used in later versions of this chassis and contains both the focus divider and HV tripler in a single package (it's also more reliable).
|
Is it easy to switch to the single unit? Are all the piece there and I just need to do a little soldering or something?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|