Quote:
Originally Posted by DaveWM
those all look pretty good, You can still try the diode (I would just unsolder and check the a DMM compare to the new one) then the resistors. This may be very late question, but do you have the brightness cranked up? or the contrast real low?
|
Funny you should ask. I have the contrast at a comfortable level and there's plenty of travel left on the control. You only need to turn less than a 1/4 to get the right level.
The brightness, on the other hand, is almost full. There's not headroom in the control. The full rotation gets you just over where it should be. I back it down just a bit to get to the right level. I could have sworn it had much more range before I started my repair work.
Why are you asking? Is there something in the numbers?
Also, if the numbers look okay, does that mean the resistors are probably okay as well? I will do the diode on Wed. I'm running out of steam and don't feel like flipping her over at the moment.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|